SANY Wear Ring 13673796 for SY365 / SY385

Quick Specs

Product Introduction

The 13673796 wear ring is a machined steel ring for SANY SY365 and SY385 excavators. It measures 210 x 22 x 210 mm and weighs 3.92 kg, and it carries a machined hole pattern so that it can be fastened in position as a replaceable face rather than letting the parent component wear instead.

A wear ring is a consumable. It is the part that is meant to take the rubbing and the load, so when it thins, scores or loses its fit, it is renewed and the more expensive component around it is left alone. If the ring you are taking off is loose, worn past its original thickness, or has started to mark the surface it runs against, 13673796 is the part number to check against the ring in your hand.

Application

Used as the replaceable wear ring for SANY SY365 and SY385 excavators under part number 13673796.

Specifications

Compatible SANY Models

• SY365 - Wear Ring 13673796 for SANY SY365 excavators.
• SY385 - Wear Ring 13673796 for SANY SY385 excavators.

How to Confirm the Correct Part

• Match the part number "13673796" against the wear ring being replaced.
• Confirm your machine model is SY365 or SY385.
• Check the overall dimensions 210 x 22 x 210 mm and net weight 3.92 kg against the old ring.
• Measure the ring thickness and the bore at the point where it wears - a worn ring is thinner than the figure above.
• Compare the hole pattern and hole spacing with the ring you are taking off before ordering.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for wear rings, bushings, pins and other consumable components including wear ring 13673796. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of 13673796

The 13673796 wear ring fits SANY SY365 and SY385. Steel, 3.92 kg, 210 x 22 x 210 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Wear Ring 13673796 - product view showing the machined bore and hole pattern

SANY Wear Ring 13673796 - angled view of the hole pattern and machined faces

Trust and Service

• Cross-referenced part number verified against the SANY SY365 / SY385 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (3.92 kg, 210 x 22 x 210 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 13673796. They are alternative part numbers for other SANY models or other sub-systems. Always confirm compatibility before ordering.

• 14105157 - SANY Sprocket (SY365 / SY385)
• 13124497 - SANY Pin Shaft (SY385 / SY365)
• 60053662 - SANY Track Shoe (SY365 / SY335)
• 12123787 - SANY Carrier Roller (SY365 / SY245 / SY385)

Original vs OEM

The 13673796 wear ring is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY365 / SY385 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

13673796 Specific FAQ

1. Q: Which SANY models does 13673796 fit?
A: SY365 and SY385 machines.

2. Q: What is the material and weight?
A: Steel, 3.92 kg.

3. Q: What are the dimensions?
A: 210 x 22 x 210 mm as given on the parameter sheet. Measure the old ring to be sure before ordering.

4. Q: Is a wear ring a consumable?
A: Yes. It is the part intended to take the wear, so it is renewed as a service item rather than repaired.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number and the part number from the old ring, and compare the thickness, bore and hole pattern while the machine is apart.

Request the Correct Wear Ring

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 13673796). Click Send Inquiry on the inquiry panel.