SANY Pin 60334731 for SY365 / SY485 / SY500

Quick Specs

Product Introduction

The 60334731 pin is a steel pivot pin for the working equipment of SANY SY365, SY485 and SY500 excavators. It is a machined stepped pin measuring 74.2 x 25.3 x 25.3 mm and weighing 0.56 kg, with a plain shank and a locating step that seats it in the linkage eye.

If the original pin on your machine is worn, scored, seized in its bore or no longer held by its retaining ring, 60334731 is the cross-referenced replacement. Compare the shank diameter, the step length and the overall 74.2 x 25.3 x 25.3 mm size against the old pin before ordering, and check that your model is one of SY365, SY485 or SY500.

Application

Used as a pivot and linkage pin in the working equipment of SANY SY365, SY485 and SY500 excavators under part number 60334731. It works together with its retaining ring and the surrounding pin shafts, bushings and wear rings. When fitting a replacement, the details worth comparing against the old pin are the 74.2 x 25.3 x 25.3 mm overall size, the shank diameter and the position of the locating step.

Specifications

Compatible SANY Models

• SY365 - Pin 60334731 for SANY SY365 excavators.
• SY485 - Pin 60334731 for SANY SY485 excavators.
• SY500 - Pin 60334731 for SANY SY500 excavators.

How to Confirm the Correct Part

• Match the part number "60334731" against the pin being replaced.
• Confirm your machine model is SY365, SY485 or SY500.
• Check the overall size 74.2 x 25.3 x 25.3 mm against the old pin.
• Compare the shank diameter, the step length and the end chamfer with the pin you are taking out.
• Contact Averdyn with your machine serial number if you are unsure about fitment.

Why Choose Averdyn

Your SANY Work Equipment Parts Sourcing Contact

Averdyn is your sourcing contact for pins, bushings, pin shafts and wear parts for SANY machinery. Tell us part number 60334731 and your machine model - we handle the cross-reference and supply options for you.

Product Overview of 60334731

The 60334731 pin fits SANY SY365, SY485 and SY500 machines. Steel, 0.56 kg, 74.2 x 25.3 x 25.3 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Pin 60334731 - full pin showing the plain shank and the locating step

SANY Pin 60334731 - opposite side view of the shank and step

SANY Pin 60334731 - end face and chamfer detail

Trust and Service

• Cross-referenced part number verified against the SANY SY365 / SY485 / SY500 application list.
• Genuine SANY Parts, OEM Replacement Parts and Selected Aftermarket Parts options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (0.56 kg, 74.2 x 25.3 x 25.3 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 60334731. They are other work equipment part numbers for SANY machinery. Always confirm compatibility before ordering.

• 11954086 - SANY Pin Shaft
• 13124497 - SANY Pin Shaft
• 13124496 - SANY Locating Pin

Genuine SANY Parts, OEM Replacement Parts & Selected Aftermarket Parts

The 60334731 pin can be supplied as Genuine SANY Parts, OEM Replacement Parts or Selected Aftermarket Parts depending on stock and lead time. Availability depends on the specific part number.

Genuine SANY Parts - original SANY-branded parts where available. These carry the SANY part number 60334731 and match the original fitment directly.

OEM Replacement Parts - parts supplied according to OEM specifications from qualified manufacturers, cross-referenced to the SANY part number for the same SY365 / SY485 / SY500 application.

Selected Aftermarket Parts - selected replacement alternatives for customers seeking different cost options, checked against the same 74.2 x 25.3 x 25.3 mm envelope before we quote.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY Parts, OEM Replacement Parts and Selected Aftermarket Parts. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What information do you need before ordering?
A: The SANY part number, your machine model and serial number, the quantity, and the destination port or address.

6. Q: How long is delivery?
A: Delivery depends on the part number and destination. We confirm current lead time together with your quotation.

7. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

60334731 Specific FAQ

1. Q: Which SANY models does 60334731 fit?
A: SY365, SY485 and SY500 machines.

2. Q: What is the material and weight?
A: Steel, 0.56 kg.

3. Q: What are the dimensions?
A: 74.2 x 25.3 x 25.3 mm as given on the parameter sheet. Compare the old pin to be sure before ordering.

4. Q: Where does this pin fit?
A: 60334731 is a pivot and linkage pin in the working equipment of the machine, held in place by its retaining ring.

5. Q: How do I know if the pin needs replacing?
A: Look for a worn, scored or seized pin, noticeable play in the joint or a pin that has started to work loose from its retaining ring. Compare the shank diameter, the step length and the 74.2 x 25.3 x 25.3 mm size against the old part. If you are unsure which pin on your machine carries part number 60334731, send us a photo together with your machine serial number.

Request the Correct Pin

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 60334731). Click Send Inquiry on the inquiry panel.