SANY Bushing 11967354 for SY265 / SY245

Quick Specs

Product Introduction

The 11967354 bushing is a machined steel sleeve used in the pivot joints of SANY SY265 and SY245 excavators. It measures 95 x 95 x 90 mm and weighs 1.33 kg, and it provides the replaceable bearing surface between the pin and the bore it runs in, so it takes the load of the joint movement.

Bushings are wear items. The bore picks up scoring, the wall thins and the clearance opens up. Once the bore is oval the pin starts to knock and the joint gets progressively worse, which is why the bushing is normally renewed at the same time as the pin. If you can feel play in the joint, or the old sleeve is loose in its bore, 11967354 is the part number to check against the bushing you are taking out.

Application

Used as a pivot bushing in the linkage and attachment joints of SANY SY265 and SY245 excavators, where it provides the replaceable bearing surface between the pin and the bore it runs in.

Specifications

Compatible SANY Models

• SY265 - Bushing 11967354 for the pivot joints of SANY SY265 excavators.
• SY245 - Bushing 11967354 for the pivot joints of SANY SY245 excavators.

How to Confirm the Correct Part

• Match the part number "11967354" against the bushing being replaced.
• Confirm your machine model is SY265 or SY245.
• Check the overall dimensions 95 x 95 x 90 mm and net weight 1.33 kg against the old bushing.
• Measure the bore and the outer diameter of the old bushing before ordering.
• Check the mating pin at the same time - the pin and bushing normally wear together.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for pins, bushings and linkage components including bushing 11967354. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of 11967354

The 11967354 bushing fits SANY SY265 and SY245. Steel, 1.33 kg, 95 x 95 x 90 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Bushing 11967354 - product view of the steel sleeve

Trust and Service

• Cross-referenced part number verified against the SANY SY265 / SY245 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (1.33 kg, 95 x 95 x 90 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 11967354. They are alternative part numbers for other SANY models or other sub-systems. Always confirm compatibility before ordering.

• 11954086 - SANY Pin Shaft (SY265 / SY245)
• A820202003323 - SANY Bushing (SY365 / SY335)
• 14039205 - SANY Bushing (SY385 / SY415)
• 12123787 - SANY Carrier Roller (SY365 / SY245 / SY385)

Original vs OEM

The 11967354 bushing is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY265 / SY245 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

11967354 Specific FAQ

1. Q: Which SANY models does 11967354 fit?
A: SY265 and SY245 machines.

2. Q: What is the material and weight?
A: Steel, 1.33 kg.

3. Q: What are the dimensions?
A: 95 x 95 x 90 mm as given on the parameter sheet. Measure the old bushing to be sure before ordering.

4. Q: Where is a bushing used?
A: In a pivot joint, where it provides the replaceable bearing surface between the pin and the bore, and acts as a wear item.

5. Q: Should I replace the pin at the same time?
A: It is worth checking. A worn bushing usually means the matching pin has wear too, so measure both while the joint is apart and replace them as a pair if needed.

Request the Correct Bushing

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 11967354). Click Send Inquiry on the inquiry panel.