SANY Pin Shaft A810303990032 for SY335 / SY368 / SY485

Quick Specs

Product Introduction

The A810303990032 pin shaft is a steel pin used on SANY SY335, SY368 and SY485 excavators. It works as a pivot pin in the working equipment, where it carries the load of the linkage, and it is renewed when that joint is serviced.

If you are repairing a SY335, SY368 or SY485 and need a pin shaft with this part number, A810303990032 is the cross-referenced replacement. Always confirm the bore and the retaining arrangement on your machine before fitting.

Application

Used as a pivot pin in the working equipment of SANY SY335, SY368 and SY485 excavators, where it takes the load of the linkage movement.

Specifications

Compatible SANY Models

• SY335 - Pin shaft A810303990032 for the working equipment of SANY SY335 excavators.
• SY368 - Pin shaft A810303990032 for the working equipment of SANY SY368 excavators.
• SY485 - Pin shaft A810303990032 for the working equipment of SANY SY485 excavators.

How to Confirm the Correct Part

• Match the part number "A810303990032" against the pin being replaced.
• Confirm your machine model is SY335, SY368 or SY485.
• Check dimensions 90 x 90 x 495 mm and net weight 25.4 kg match the pin being replaced.
• Inspect the mating bore at the same time - wear usually appears on both the pin and the bore.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for components including pin shaft A810303990032. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of A810303990032

The A810303990032 pin shaft fits SANY SY335, SY368 and SY485. Steel, 25.4 kg, 90 x 90 x 495 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Pin Shaft A810303990032 - product view

Trust and Service

• Cross-referenced part number verified against the SANY SY335 / SY368 / SY485 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (25.4 kg, 90 x 90 x 495 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for A810303990032. They are alternative part numbers for other SANY models or other sub-systems. Always confirm compatibility before ordering.

• 13124497 - SANY Pin Shaft (SY385 / SY365)
• 13623374 - SANY Pin Shaft (SY385 / SY365)
• 11954086 - SANY Pin Shaft (SY265 / SY245)
• 11954088 - SANY Pin Shaft (SY265 / SY245)

Original vs OEM

The A810303990032 pin shaft is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY335 / SY368 / SY485 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

A810303990032 Specific FAQ

1. Q: Which SANY models does A810303990032 fit?
A: SY335, SY368 and SY485 machines.

2. Q: What is the material and weight?
A: Steel, 25.4 kg.

3. Q: What are the dimensions?
A: 90 x 90 x 495 mm as given on the parameter sheet. Measure the old pin to be sure before ordering.

4. Q: Where is a pin shaft used?
A: In the working equipment, where it carries the load of the linkage movement.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number and the part number from the old pin - we help verify.

Request the Correct Pin

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number A810303990032). Click Send Inquiry on the inquiry panel.