SANY Pin Shaft 11954086 for SY265 / SY245

Quick Specs

Product Introduction

The 11954086 pin shaft is a machined steel pivot pin used in the bucket and linkage assembly of SANY SY265 and SY245 class excavators. It is a flanged pin with a machined end bore, sized 90 x 90 x 545 mm and weighing 27 kg, so it carries the full load of the attachment joint it sits in.

Pivot pins are wear items. The working surface picks up scoring and fretting, the bore ovalises, and grease passages can block. A worn pin lets the joint move, which quickly wears the matching bushing and can damage the boss on the arm or linkage. When the joint has play, or the pin no longer holds grease, 11954086 is the part number to check against the pin you are taking out.

Application

Used as a pivot pin in the bucket and linkage assembly of SANY SY265 and SY245 excavators, working with the matching bushings and retaining hardware at that joint.

Specifications

Compatible SANY Models

• SY265 - Pin shaft 11954086 for the bucket and linkage assembly of SANY SY265 excavators.
• SY245 - Pin shaft 11954086 for the bucket and linkage assembly of SANY SY245 excavators.

How to Confirm the Correct Part

• Match the part number "11954086" against the pin being replaced.
• Confirm your machine model is SY265 or SY245.
• Check the overall dimensions 90 x 90 x 545 mm and net weight 27 kg against the pin being replaced.
• Check the flange diameter, the end bore and the grease passage against the pin you are taking out.
• Inspect the matching bushing and boss at the same joint - a worn pin usually means the bushing needs attention too.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for pins, bushings and linkage components including pin shaft 11954086. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of 11954086

The 11954086 pin shaft fits SANY SY265 and SY245. Steel, 27 kg, 90 x 90 x 545 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Pin Shaft 11954086 - side view showing the flanged head and end bore

SANY Pin Shaft 11954086 - three quarter view of the flange and cross-hole

SANY Pin Shaft 11954086 - reverse side view

SANY Pin Shaft 11954086 - part number marked on the pin end face

Trust and Service

• Cross-referenced part number verified against the SANY SY265 / SY245 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (27 kg, 90 x 90 x 545 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 11954086. They are alternative part numbers for other components of the same undercarriage or front attachment, or for other SANY models. Always confirm compatibility before ordering.

• 14105157 - SANY Sprocket (SY365 / SY385)
• 12123787 - SANY Carrier Roller (SY365 / SY245 / SY385)
• 60053662 - SANY Track Shoe (SY365 / SY335)
• SSY005194639 - SANY Track Shoe Bolt (SY365 / SY335)

Original vs OEM

The 11954086 pin shaft is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY265 / SY245 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

11954086 Specific FAQ

1. Q: Which SANY models does 11954086 fit?
A: SY265 and SY245 machines.

2. Q: What is the material and weight?
A: Steel, 27 kg.

3. Q: What are the dimensions?
A: 90 x 90 x 545 mm as given on the parameter sheet. Measure the old pin to be sure before ordering.

4. Q: Should I replace the bushing at the same time?
A: It is worth checking. A worn pivot pin usually scores the matching bushing, so measure the bore while the joint is apart and replace both if needed.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number and the part number from the old pin - we help verify.

Request the Correct Pin Shaft

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 11954086). Click Send Inquiry on the inquiry panel.