SANY Bushing A820202003321 for SY365 / SY335

Quick Specs

Product Introduction

The A820202003321 bushing is a steel sleeve used on SANY SY365 and SY335 excavators. It is a wear component in a pivot joint, so it is normally renewed together with the pin it runs on when that joint is serviced.

If you are repairing a SY365 or SY335 and need a bushing with this part number, A820202003321 is the cross-referenced replacement. Always measure the old bushing and confirm the retaining arrangement on your machine before fitting.

Application

Used as a pivot bushing on SANY SY365 and SY335 excavators, where it takes the load of the joint movement and is replaced as a wear item.

Specifications

Compatible SANY Models

• SY365 - Bushing A820202003321 for the pivot joints of SANY SY365 excavators.
• SY335 - Bushing A820202003321 for the pivot joints of SANY SY335 excavators.

How to Confirm the Correct Part

• Match the part number "A820202003321" against the bushing being replaced.
• Confirm your machine model is SY365 or SY335.
• Measure the bore, the outer diameter and the length of the old bushing before ordering.
• Check the mating pin at the same time - the pin and bushing normally wear together.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for components including bushing A820202003321. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of A820202003321

The A820202003321 bushing fits SANY SY365 and SY335. Steel, 1.69 kg. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Bushing A820202003321 - product view

SANY Bushing A820202003321 - standing view

SANY Bushing A820202003321 - side view

SANY Bushing A820202003321 - bore and lubrication hole

Trust and Service

• Cross-referenced part number verified against the SANY SY365 / SY335 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (1.69 kg, 105 x 105 x 97 mm, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for A820202003321. They are alternative part numbers for other SANY models or other sub-systems. Always confirm compatibility before ordering.

• A820202003323 - SANY Bushing (SY365 / SY335)
• 14039205 - SANY Bushing (SY385 / SY415)
• 13623374 - SANY Pin Shaft (SY385 / SY365)
• 13124497 - SANY Pin Shaft (SY385 / SY365)

Original vs OEM

The A820202003321 bushing is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY365 / SY335 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

A820202003321 Specific FAQ

1. Q: Which SANY models does A820202003321 fit?
A: SY365 and SY335 machines.

2. Q: What is the material and weight?
A: Steel, 1.69 kg.

3. Q: What are the dimensions?
A: 105 x 105 x 97 mm as given on the parameter sheet. Measure the old bushing to be sure before ordering.

4. Q: Where is a bushing used?
A: In a pivot joint, where it carries the load of the joint movement and acts as a wear item.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number and the part number from the old bushing - we help verify.

Request the Correct Bushing

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number A820202003321). Click Send Inquiry on the inquiry panel.