SANY Bushing 14039205 for SY385 / SY415

Quick Specs

Product Introduction

The 14039205 bushing is a steel sleeve used on SANY SY385 and SY415 excavators. It is a wear component in a pivot joint, so it is normally renewed together with the pin it runs on when that joint is serviced.

If you are repairing a SY385 or SY415 and need a bushing with this part number, 14039205 is the cross-referenced replacement. Always measure the old bushing and confirm the retaining arrangement on your machine before fitting.

Application

Used as a pivot bushing on SANY SY385 and SY415 excavators, where it takes the load of the joint movement and is replaced as a wear item.

Specifications

Compatible SANY Models

• SY385 - Bushing 14039205 for the pivot joints of SANY SY385 excavators.
• SY415 - Bushing 14039205 for the pivot joints of SANY SY415 excavators.

How to Confirm the Correct Part

• Match the part number "14039205" against the bushing being replaced.
• Confirm your machine model is SY385 or SY415.
• Measure the bore, the outer diameter and the length of the old bushing before ordering.
• Check the mating pin at the same time - the pin and bushing normally wear together.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for components including bushing 14039205. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of 14039205

The 14039205 bushing fits SANY SY385 and SY415. Steel, 2.925 kg. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Bushing 14039205 - product view

SANY Bushing 14039205 - packaging label showing the part number 14039205

Trust and Service

• Cross-referenced part number verified against the SANY SY385 / SY415 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (2.925 kg, steel) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 14039205. They are alternative part numbers for other SANY models or other sub-systems. Always confirm compatibility before ordering.

• 13124497 - SANY Pin Shaft (SY385 / SY365)
• 13623374 - SANY Pin Shaft (SY385 / SY365)
• 13673796 - SANY Wear Ring (SY365 / SY385)
• A820202003323 - SANY Bushing (SY365 / SY335)

Original vs OEM

The 14039205 bushing is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY385 / SY415 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

14039205 Specific FAQ

1. Q: Which SANY models does 14039205 fit?
A: SY385 and SY415 machines.

2. Q: What is the material and weight?
A: Steel, 2.925 kg.

3. Q: What size is the bushing?
A: The part marking gives 100 x 120 x 115 mm and the parameter sheet gives overall dimensions of 120 x 115 x 120 mm. Measure the old bushing to be sure before ordering.

4. Q: Where is a bushing used?
A: In a pivot joint, where it carries the load of the joint movement and acts as a wear item.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number and the part number from the old bushing - we help verify.

Request the Correct Bushing

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 14039205). Click Send Inquiry on the inquiry panel.