SANY Engine Wiring Harness 60311903 for SY365 / SY285 / SY385 / SY335

Quick Specs

Product Introduction

The 60311903 engine wiring harness is the electrical loom for SANY SY365, SY285, SY385 and SY335 excavators. It is built from pure copper conductors, weighs 1.2 kg and measures 500 x 500 x 300 mm, with the individual circuits bundled inside protective conduit and terminated in moulded multi-pin connectors.

An engine harness carries the electrical circuits between the engine, its sensors and the machine's control system. When a loom is chafed through, corroded at a connector or damaged during an engine repair, patching individual wires rarely holds up - the harness is renewed as a complete assembly. If the harness on your machine is the part you are taking off, check 60311903 against the number on the original before ordering.

Application

Used as the engine wiring harness for SANY SY365, SY285, SY385 and SY335 excavators under part number 60311903.

Specifications

Compatible SANY Models

• SY365 - Engine Wiring Harness 60311903 for SANY SY365 excavators.
• SY285 - Engine Wiring Harness 60311903 for SANY SY285 excavators.
• SY385 - Engine Wiring Harness 60311903 for SANY SY385 excavators.
• SY335 - Engine Wiring Harness 60311903 for SANY SY335 excavators.

How to Confirm the Correct Part

• Match the part number "60311903" against the harness being replaced.
• Confirm your machine model is SY365, SY285, SY385 or SY335.
• Check the overall dimensions 500 x 500 x 300 mm and net weight 1.2 kg against the old harness.
• Compare the connector shapes, pin counts and the position of each branch with the harness you are taking off.
• Lay the old harness out flat and photograph every connector and branch before ordering.
• Contact Averdyn with your machine serial number if you are unsure about compatibility.

Why Choose Averdyn

Your SANY Parts Sourcing Contact

Averdyn is your dedicated SANY parts sourcing contact for engine wiring harnesses, sensors, switches and other electrical components including harness 60311903. Tell us the part number and machine model - we handle the cross-reference and supply options for you.

Product Overview of 60311903

The 60311903 engine wiring harness fits SANY SY365, SY285, SY385 and SY335. Pure copper, 1.2 kg, 500 x 500 x 300 mm. See the image above for the actual part before ordering.

Technical Inquiry and Delivery Planning

Send your machine serial number, part number and quantity. We confirm fitment, supply options and current lead time before you commit to an order.

Product Detail Photos

SANY Engine Wiring Harness 60311903 - complete loom with conduit, cable ties and multi-pin connectors

SANY Engine Wiring Harness 60311903 - branch layout and connector ends

SANY Engine Wiring Harness 60311903 - cable routing and connector grouping

Trust and Service

• Cross-referenced part number verified against the SANY SY365 / SY285 / SY385 / SY335 application list.
• Genuine SANY / OEM / Selected Aftermarket supply options based on part number and availability.
• Stock and lead time confirmed on inquiry - no surprise ETAs.
• Export-ready packaging and worldwide shipping supported on request.
• Specs (1.2 kg, 500 x 500 x 300 mm, pure copper) verified against the parameter sheet.

Related Products

Related parts listed below are not direct substitutes for 60311903. They are alternative part numbers for the electrical system of SANY excavators. Always confirm compatibility before ordering.

• 141604000256A - SANY Excavator Lighting Lamp (SY365 / SMHW48V)
• A241200001217 - SANY Ignition Switch (Replacement Parts)
• 130907000768A - SANY Excavator Wiper Arm and Blade Assembly (SY195 / SY155 / SY485)

Original vs OEM

The 60311903 engine wiring harness is supplied as Genuine SANY, OEM or Selected Aftermarket depending on stock and lead time. All options are cross-referenced to the original SANY part number and intended for the same SY365 / SY285 / SY385 / SY335 application.

FAQ

General FAQ

1. Q: Do you have stock?
A: Stock varies by part number. Send your inquiry and we will confirm current availability.

2. Q: Do you ship worldwide?
A: Yes. We support worldwide shipping; lead time depends on destination and part.

3. Q: Is this genuine SANY?
A: Supply options include Genuine SANY, OEM and Selected Aftermarket. We confirm which is available for your part number.

4. Q: Can I get a quotation first?
A: Yes. Send part number, quantity and machine model - we reply with options and lead time.

5. Q: What information do you need before ordering?
A: The SANY part number, your machine model and serial number, the quantity, and the destination port or address.

6. Q: How long is delivery?
A: Delivery depends on the part number and destination. We confirm current lead time together with your quotation.

7. Q: What if the part does not fit?
A: Contact us with photos and serial number before returning. We help verify fitment.

60311903 Specific FAQ

1. Q: Which SANY models does 60311903 fit?
A: SY365, SY285, SY385 and SY335 machines.

2. Q: What is the material and weight?
A: Pure copper, 1.2 kg.

3. Q: What are the dimensions?
A: 500 x 500 x 300 mm as given on the parameter sheet. Measure the old harness to be sure before ordering.

4. Q: What does an engine wiring harness do?
A: It carries the electrical circuits between the engine, its sensors and the machine's control system. A damaged loom is normally renewed as a complete harness rather than repaired wire by wire.

5. Q: Can I confirm fitment before ordering?
A: Yes. Send your machine serial number, the part number from the old harness, and photos of the harness laid out with its connectors, and we will help check it against 60311903.

Request the Correct Engine Wiring Harness

Send your inquiry with: Name, Email, Phone, Message (Tell us your machine model and part number 60311903). Click Send Inquiry on the inquiry panel.